It is inevitable that certain damage will occur in the daily use of the shot blasting machine, but how to maintain it? According to the experience of the shot blasting machine maintenance personnel, the maintenance of the shot blasting machine should take different maintenance measures according to different service cycles. Remember these four points:

1. Regular Lubrication: The lubricating oil of the electric actuator motor and transmission of the shot peening machine is required to lubricate the components, and the viscosity of the lubricating oil varies. Almost all steel castings, gray castings, malleable steel parts, ductile iron parts, etc. of the shot blasting machine must be shot blasted. This is not only to remove the oxide scale and sticky sand on the surface of the casting, but also an indispensable preparation process before the quality inspection of the casting. For example, the casing of a large gas turbine must be subjected to strict shot blasting before non-destructive inspection to ensure the integrity of the inspection results. reliability.

2. Improve the operating and working environment of the enterprise: In order to ensure the reliability of the electric executive management mechanism of the shot blasting machine, it must be ensured that it operates in a suitable operation and development environment to avoid the students from the social environment and other environmental factors. .

3. Regular inspections: Regular inspections to detect accidental operations, at least as a factor in troubleshooting, it is helpful to avoid detours.

4. Do a good job in the management of the fault account: a detailed information record should be made for each fault that has been dealt with, including the system fault phenomenon, fault data analysis and search process, the main cause of the fault, processing methods, preventive control measures, etc.