Next, explain the components of the pass-through shot blasting machine:

1. Shot blasting cleaning room. The position of the top hook walking groove of the finishing room is sealed with a guard plate, a multi-layer anti-abrasion offset plate, and the bottom layer is sealed with a polyurethane plate material that is not afraid of impact. The nylon brush on the top is composed of a labyrinth sealing belt. delicate.

2. Shot blasting wheel assembly. The blades of the shot blasting machine are easy to disassemble and assemble, and the speed is not slow. The single disc shot blasting machine is adopted, which has good stability and uniform shot blasting. The blades, shot separation wheel, directional sleeve, etc. in the shot blasting machine are all made of high-quality materials through a special heat treatment process, which reduces the noise during the operation of the shot blasting machine and prolongs the service life. The appearance is very beautiful, the structure is very beautiful, and the manufacturing and maintenance operations are simple.

3. Pill circulation purification system. The pellet circulation purification system can be divided into a circulation system and a pellet separation purification system. It consists of many parts. The following parts are introduced to you:

1. Screw conveyor. This part has been serialized by our company, with high versatility and interchangeability, and stable function. The whole screw shaft is processed after welding, which determines the coaxiality of both ends of the screw shaft and improves the stability of operation.

2. Bucket elevator. The lower shaft of the hoist is equipped with a pulse wheel, which can detect and track the working state of the hoist. Once the hoist fails, the signal feedback can be processed immediately, and the stable operation of the equipment can be determined.

3. Separator. The separator is mainly composed of a separating and conveying screw, and a pellet silo in the sorting area. Adjusting the seam between the vertical and horizontal adjustment baffles of the separator can improve the height and track of the fabric layer, and with the adjustment of the adjustment baffles in the separation area, an excellent separation effect can be obtained, which completes the separation of projectiles and the same particles.